123m Eco-Friendly Natural Gas Fired Tunnel Kiln for Sanitary Ware

• Warranty: 1 Year After The Final Acceptance
• Type: Tunnel Kiln
• Application: Firing Machine
• Certification: ISO9001:2015
• Automatic Grade: Automatic
• Customization: Customized
• Model NO.: TK-123*3.6M
• Control Systems: PLC
• Transport Package: Pallet, Naked Packed, Package,
• Specification: 123*3.6*0.86M
• Trademark: Zhongya kiln
• Origin: China
• HS Code: 8417809090
• Production Capacity: 1100000pieces/Year

Product Description

Product Description

This equipment is a lightweight energy-saving tunnel kiln composed of 107 kiln cars and 61 kiln body modules, with a fully automatic kiln car operation system and control system. The kiln body is an assembled structure, and the steel frame, refractory materials, and pipelines are not made or masonry on site; Only installed on-site. The installation concept of modern design and construction provides convenient operation while bringing higher benefits to customers.
The design concept of this kiln is to provide a modern structure with low energy consumption, easy operation, and the following characteristics:

Main Features:
-The kiln body adopts low thermal storage materials, and the double sealing structure adopts a mixed structure of hard bricks and lightweight refractory bricks.
-The kiln car is lightweight and sturdy, with interlocking seals between the kiln cars, and a labyrinth structure between the kiln walls and the kiln cars.
-The multi-point staggered distribution method using medium pressure high-speed burners is beneficial for controlling temperature differences and promoting the transition between slow burning and fast burning.
-Adopting proportional combustion method and fully automatic temperature control; Better regulation of heating and cooling, saving energy consumption and controlling the atmosphere inside the kiln.
-Advanced computer+PLC on-site centralized control makes kiln operation simple and intuitive.
-The use of low-power secondary air burners in the smoke exhaust preheating section helps to reduce cross-sectional temperature differences and improve product qualification rates.
-Fully utilize the flue gas and hot air extraction system, reserve heat utilization interfaces in the chimney, and provide heat sources for the drying kiln.
-All fans are equipped with frequency converters to save energy and reduce noise pollution.

Product Parameters

 

Specification	Index	Remark
Products	Sanitary ware	First firing
Kiln length	123M
Useful width	3.6M	450mm*8pcs
Useful height	0.86M
Size of kiln car	3.7*1.6M
Kiln defect	≤4%	The defect indicators of products such as dirt, cracks, pinholes, etc. shall not exceed the indicators of similar kilns
Operation temperature	1230ºC	Normal peak temperature
Max. temperature	1280ºC	Design Temperature
Cycle Time	14-18H	According to the product structure
Combustion control mode		Flow and ratio control mode
Firing Atmosphere	oxidation	The oxygen content in the high insulation section shall not be less than 8%
Energy consumption	930-980±5%Kcal/Kg	The energy consumption is based on the local annual average temperature of 23.2 ºC. The weight of a single kiln truck and kiln equipment is 349.36kg, and the product weight is calculated by Party A

 

Certifications

 

Our Advantages

Equipment body

1. Mature energy-saving firing technology

2. Design and the selection of materials are advanced and reasonable

3. Low gas consumption

4. Low temperature on kiln outside surface and under the cars

5. Small temperature difference in kiln cross-section

6. High qualified rate of sintering

7. Fully automatic control, safe and reliable operation.
 

Control system

1. Kiln control system is developed independently by us, which is suitable for air/gas ratio control,pulse control and flow control according to different requirements of the production processing.

2. Kiln control system mainly select Siemens PLC module of S7-300 and S7-200 or OMRON PLC module of CJ2M, industrial control computer and touch screen.

3.This system can collect the signals of  kiln temperature, the pressure, air flow, etc., then send these information to main control panel or management system to display, record, set and control.

4.Control system can record and mange klin data in Microsoft windows, you can easily inquire historial data for defect analysis.

Our cervice

Pre-Sales service:
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication

After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.

-Supply of spare parts for future maintenance needs.

-Detailed information on vulnerable materials for easy reference.

-Prompt technicial support and assistance by phone, video, email or solve at site if need.