106m New Energy-Saving Tunnel Kiln to Fire The Sagger for Materials of Lithium Batteries

• Customization: Available
• Warranty: 1 Year After The Final Acceptance
• Type: Tunnel Kiln
• Model NO.: TK-106*2.2M
• Application: Firing Machine
• Certification: ISO9001:2015
• Automatic Grade: Automatic
• Control System: PLC
• Transport Package: Pallet, Naked Packed, Package,
• Specification: 106*2.2*0.84M
• Trademark: Zhongya kiln
• Origin: China
• HS Code: 8417809090
• Production Capacity: 7840 Pieces/Day

Product Description

Product Description

The kiln consists of 53 modules, with the length of each module is 2000mm.
Kiln body is composed of steel frame and refractory materials according to a strict process. Steel frame as a support structure is made of high-quality structural steel . Kiln exterior is covered by the decorated steel plates, so this structure is suitable and generous. The expansion joints of 15mm between each module will be filled with fiber blankets, and the modules are connected by with bolts.
The refractory brick of high-grade and fiber blankets will be selected as kiln refractories, the different materials will be used in different modules. The bricks of JM23 mullite and lightweight insulation bricks will be used in kiln wall where the temperature below 1000 ºC, and here the refractory of hot face of the ceiling is hollow plate of cordierite with the thickness of 25mm; The materials of kiln lining will select insulated bricks of JM26 where the temperature is within 1000 ºC-1200 ºC; Hollow alumina ball brick of 1.7 g/cm3 is used in kiln ceiling and kiln wall where kiln temperature is within 1200 ºC -1400 ºC, and here the material of cold face on the kiln will be JM23-0.6 insulation bricks of high-grade and fiber blanket of aluminum silicate. In the area where the burners are installed in double layers, the expansion joint between kiln modules is filled with fiber blanket which contains zirconia.
 

 

 

Product Parameters

 

Specification	Index	Remark
Products	the sagger for the battery material	First firing
Production capacity	7840 Pieces/Day
Useful length	106M
Useful width	2.0M
Useful height	0.84M
Useful loading of kiln car	2.0×1.5×0.84M
Firing control mode		Flow and ratio control mode
Operation temperature	1400ºC	Normal peak temperature
Category of gas		Natural gas
Firing Atmosphere		oxidation
Installed capacity	276.4KW	126.5kw is spared,excluding the fan for dryer kiln and heat exchanger

 

Certifications

 

Our Advantages

Equipment body

1. Mature energy-saving firing technology

2. Design and the selection of materials are advanced and reasonable

3. Low gas consumption

4. Low temperature on kiln outside surface and under the cars

5. Small temperature difference in kiln cross-section

6. High qualified rate of sintering

7. Fully automatic control, safe and reliable operation.
 

Control system

1. Kiln control system is developed independently by us, which is suitable for air/gas ratio control,pulse control and flow control according to different requirements of the production processing.

2. Kiln control system mainly select Siemens PLC module of S7-300 and S7-200 or OMRON PLC module of CJ2M, industrial control computer and touch screen.

3.This system can collect the signals of  kiln temperature, the pressure, air flow, etc., then send these information to main control panel or management system to display, record, set and control.

4.Control system can record and mange klin data in Microsoft windows, you can easily inquire historial data for defect analysis.

Our cervice

Pre-Sales service:
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication

After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.

-Supply of spare parts for future maintenance needs.

-Detailed information on vulnerable materials for easy reference.

-Prompt technicial support and assistance by phone, video, email or solve at site if need.