32m Single-Hole Four-Push Gas-Fired Fully Automatic Pusher Kiln

• Customization: Available
• Warranty: 1 Year After The Final Acceptance
• Type: Pusher Kiln
• Model NO.: PK-32*1.98M
• Certification: ISO9001:2015
• Automatic Grade: Automatic
• Customization: Customized
• Control System: PLC
• Transport Package: Pallet, Naked Packed, Package,
• Specification: 32*1.98M
• Trademark: Zhongya kiln
• Origin: China
• HS Code: 8417809090

Product Description

Product Description

The device is 32 meters long and consists of 16 standard sections. 1-5 smoke exhaust preheating sections, each section is 2.1 meters long, with a total length of 10.5 meters; High temperature firing section 6-11 sections, each section is 1.8 meters long, with a total length of 10.8 meters;The rapid cooling section is section 12, which has 1.8 meters long ;The cooling section is 13-16 sections, each section is 2.2 meters long, with a total length of 8.8 meters.
The cooling air box is section 17, the length is 3 meters.
The kiln body adopts a steel frame as a protective structure and is equipped with decorative panels on the outside. Different refractory materials are used in the kiln according to the temperature. To reduce thrust and friction between the slide rail and the skateboard, the slope of the kiln inlet and outlet slide rails is 320mm. The kiln body is composed of several parts, including the kiln steel frame, refractory insulation materials, natural gas supply and combustion system, ventilation and exhaust system, material conveying system, electrical control system, etc.

 

Product Parameters

 

Specification	Index	Remark
Products	The Sagger
Kiln section width	1980mm	Preheating section is 1860mm
Push-plate Specification	360×340×60mm	L×W×H(340 of them are kiln wide direction)
Width of bottom plate guide rail	370mm
Useful loading height	870mm
Firing control mode		Flow and ratio control mode
Operation temperature	1400ºC	Normal peak temperature
Design Temperature	1500ºC
Category of gas		Natural gas
Cycle	18-42h	Adjustable
Firing Atmosphere		oxidation
Kiln defect	≤2%	Including cold and hot cracking

 

Certifications

 

Our cervice

Pre-Sales service:
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication

After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.

-Supply of spare parts for future maintenance needs.

-Detailed information on vulnerable materials for easy reference.

-Prompt technicial support and assistance by phone, video, email or solve at site if need.